Miele PG 8583 User Manual

Program settings
116
Blower cooling
After drying, cooling of the wash load can be accelerated by the dry-
ing system. To do so the drying system blower runs with the heating
switched off, cooling the interior of the wash chamber.
...
Cooling down with fan
Cooling down with fan
Set the time
No
- No
The drying system blower is not switched on.
- Set the time
The drying system blower will run for a specified duration.
 Use the arrow buttons  and  to select an option and press OK to
confirm your selection.
When Set the time has been selected, the duration of the cooling
down pause must then be set.
Cooling down with fan
120
(10 - 200
s
s)
The setting value is entered in increments of 10. The possible range is
shown in the bottom line of the display.
 Use the arrow buttons  (higher) and  (lower) to set the cooling
down duration.
 Press OK to save the setting.

Miele PG 8583 Specifications

General

Category	Laboratory Equipment
Model	PG 8583
Type	Laboratory glassware washer
External dimensions, height	835 mm
External dimensions, width	600 mm
Usable chamber depth	500 mm
Number of baskets	2
Max temperature	93°C
Heating	Electric
Water connection	Cold and hot water
Electrical connection	230V, 50Hz
Power supply	230V, 50Hz