Miele PG 8583 User Manual

Maintenance measures
123
 Turn the microfine filter in the direction of the arrow and remove it
together with the coarse filter.
 Press the catches towards each other and pull the coarse filter up-
wards to remove it.
 Remove the fine filter which sits loosely between the coarse filter
and the microfine filter.
 Remove the flat filter last.
 Clean the filters.
 Re-insert the filter combination in the reverse order. Ensure ...
- ... that the flat filter sits flat in the base of the wash chamber.
- ... that the coarse filter has securely clicked into place in the mi-
crofine filter.
- ... that the microfine filter is tightly screwed in as far as it will go.
If a cleaning interval was set for the filters in the wash chamber, this
interval must be reset after cleaning; see "Settings /Filter mainte-
nance.

Miele PG 8583 Specifications

General

Category	Laboratory Equipment
Model	PG 8583
Type	Laboratory glassware washer
External dimensions, height	835 mm
External dimensions, width	600 mm
Usable chamber depth	500 mm
Number of baskets	2
Max temperature	93°C
Heating	Electric
Water connection	Cold and hot water
Electrical connection	230V, 50Hz
Power supply	230V, 50Hz