Cleaning the control panel and
door front
,
Remove any soiling immediately.
If this is not done, it might become
impossible to remove and could
cause the external surfaces to alter
or discolour.
^
The control panel should only be
wiped with a damp cloth.
^
Clean the front with a clean sponge
and a solution of hot water and
washing-up liquid. Then dry with a
soft cloth.
A damp microfibre E-cloth without
cleaning agent can also be used.
To avoid damaging the external
surfaces, do not use:
–
cleaning agents containing soda,
ammonia, acids or chlorides,
–
cleaning agents containing
descaling agents,
–
abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
–
solvent-based cleaning agents,
–
stainless steel cleaning agents,
–
dishwasher cleaner,
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers,
– melamine eraser blocks,
– sharp metal scrapers,
– steam cleaning appliances.
Cleaning and care
42
To Next Page
Loading...
Need help?
General
