With the help of the following guide, minor faults in the performance of the
machine, some of which may result from incorrect operation can be put right
without contacting the Service Department,
,
Repairs should only be carried out by the Miele Service Department or an
authorised Miele Service Dealer. Unauthorised or incorrect repairs could cause
personal injury or damage to the machine.
Technical problems
Problem Possible cause Remedy
The dishwasher does
not start.
The door is not properly
closed.
Push the door firmly shut.
There is no power to the
machine.
Re-establish power to the
machine.
The mains fuse has
tripped.
Reset the trip switch or
replace the fuse in the plug.
(Minimum fuse rating - see
data plate).
The machine is not
switched on.
Press the - button and
select a programme.
The dishwasher stops
during a programme.
The mains fuse has
tripped.
– Reset the trip switch in the
mains fuse box (minimum
fuse rating - see data
plate).
–
If the mains fuse trips
again, call the Miele Ser
-
vice Department.
After the programme
has started, the
In-operation indicator
light is not visible.
The reflector panel was
not correctly fitted.
Re-fit the reflector panel
correctly (see Installation
diagram).
Problem solving guide
46
To Next Page
Loading...
Need help?
General
