Leveling the dryer
The dryer does not need to be installed on a base.
However, adjustments must be made to compensate
for any unevenness in the floor.
The dryer must be level for proper operation.
^
Level the dryer by turning the feet clockwise or
counterclockwise (A) as necessary.
^
Once leveled, the discs (B) must be screwed tight
to the dryer’s base plate.
Installation on an elevated base
The dryer can be installed on an elevated concrete
base.
,
If installing the dryer on an existing concrete
base, it must be secured with retaining clips.
Otherwise, the dryer may fall off the base.
^
Secure the front feet of the dryer with the retaining
clips provided.
IMPORTANT SAFETY INSTRUCTIONS
34
To Next Page
Loading...
Need help?
General
