To open the Settings/Supervisor level menu
The Settings menu can be locked against unauthorised use
(except for the Language options). It will then only be able
to be accessed at Supervisor level by entering a code.
To select a setting
Settings Back A
Language F
Supervisor level...
^
Select Supervisor level and confirm your selection.
Settings Back A
Supervisor level
Access via code
^ Select Access via code and confirm your selection.
To enter the code
Enter the code 000(factory default setting). If you enter the
code wrongly three times, the machine will lock out for an
hour.
0 __
Enter code
^
Turn the multi-function selector until the first number
appears. Then press it to confirm your selection of this
number. Now enter the second number.
^
Repeat the process until all three numbers have been
entered.
Settings/Supervisor level menu
67
To Next Page
Loading...
Need help?
General