Standby
To save energy, the display goes out
after 10 minutes and the Start button
flashes slowly.
Operating the multi-function selector
switches the display back on again.
There are three options:
On
Standby comes on:
–
if a programme is not selected after
the machine has been switched on.
– after a programme has started.
– after the end of a programme.
Not in current prog.
(the machine is
delivered with this option selected)
Standby comes on:
– if a programme is not selected after
the machine has been switched on.
Off
The display remains on all the time.
Memory
This option is visible in the display
but not available on this machine.
Temperature unit
You can chose for the temperature to
be displayed in °C/Celsius or
°F/Fahrenheit.
The machine is delivered with the °C
option selected.
Special programmes
This option is visible in the display
but not available on this machine.
Settings/Supervisor level menu
71
To Next Page
Loading...
Need help?
General