Additional functions
32
Start time
A later wash start time can be allocated to a program using the
“Start time”function button.
Setting a start time
Select the wash program required.
When a program has been selected, the following (for example) will
appear in the display:
Cottons Hygiene
1
10,0 / 16,0
Main Wash
Rinse
°F
90
1000
U/min
+
lb
Press the “Start time”function button.
The following (for example) will appear in the display:
Cottons Hygiene
1
Start time
After setting the delay start press Start.
Start date:
10,0 / 16,0
2.4.2020
16 : 10
lb
The current time and date always appear. The entry field for hours is
highlighted.
Press the selector dial to select the hour. Rotate the selector dial to
change the hour and press the selector dial to confirm.
Rotate the selector dial to select and confirm the “Minutes” field.
Rotate the selector dial to change the minutes and press to confirm.
Rotate the selector dial to select and confirm the “Start date day”
entry field. Rotate the selector dial to change the day and press to
confirm.
Change the month and year if required.
After setting the start time, press the “START”button and the pro-
gram will start at the set time.
The display shows the current time and date and the start time.
Cottons Hygiene
1
10,0 / 16,0
Main Wash
°F
90
+
-2.4.201016 15 6 00 -3.4.2020
Start:
:
:
lb
If the drum door is opened again, the “START”button must be
pressed again.
Canceling the
start time func-
tion
Press the “Delay start”button or the “Back”button.
The changes will not be saved.
To Next Page
Loading...
Need help?
General
