Cleaning and care
38
Carry out cleaning and maintenance of the washing machine after
use if possible.
Do not use a pressure washer or water jet to clean the washing
machine.
Clean the machine casing, control panel, and plastic parts with a
mild, non-abrasive cleaning agent or with a soft, damp cloth only.
Wipe dry with a soft cloth.
Scouring agents will scratch the surface.
Clean stainless-steel parts of the casing with a standard commer-
cial stainless-steel cleaner.
Remove any deposits from the door seal with a damp cloth.
Cleaning agent can seep into electrical components.
When disinfecting the surfaces, use a damp cloth only to clean the
front and around the door lock. Do not spray any liquids.
Tip: Heavy deposits of dust around the vents housing should be re-
moved with a vacuum cleaner. The fan housing is located on the back
of the machine.
Build-up of rust
The drum is made of stainless steel. Water containing iron or ferrous
foreign objects (e.g., paper clips, iron knobs, or iron shavings), which
are introduced with the laundry, can lead to rust formation in the
drum. Clean the drum regularly in this case and if rust occurs, remove
it immediately with a proprietary stainless-steel care product. Check
the door seals for ferrous residues and clean thoroughly as described
above. This must be carried out regularly.
To Next Page
Loading...
Need help?
General
