Miele PWM 912 User Manual

Supervisor level
54
Clock display
After selecting the clock format, you can set the time of day.
Clock format
- 24h clock
- 12h clock
- No clock
Set
- The time can be set.
Date
The date can be set after selecting the date format.
Date format
- DD.MM.YYYY
- YYYY.MM.DD
- MM.DD.YYYY
Date
- The date can be set.
Volume
The volume for various sounds can be changed.
- Finish tone
- Keypad tone
- Welcome tone
It can be set to one of 7 different levels or switched off altogether.
- Fault alarm
The fault alarm can be activated or deactivated.
Visibility parame-
ters
Various parameters, such as the temperature, spin speed, extra op-
tions, etc., are displayed when a program is selected. You can de-
cide which parameters should not be displayed. These parameters
can then not be edited during program selection.
Factory default: All parameters are visible (marked in orange)
Sort Options
Under the setting Visibility parameters, Sort Extras appears in the bot-
tom line. Touch the sensor button to change the sequence of extra
options (see “Supervisor level – Arranging programs”).
Machine off sta-
tus
In order to save energy, the washing machine will switch off auto-
matically after the end of the program or if no further selection is
made. You can change this setting.
Changing this setting leads to increased energy consumption.
- No switch off
- Switch off after 15minutes (factory default)

Miele PWM 912 Specifications

General

Brand	Miele
Model	PWM 912
Category	Washer
Language	English