Name: Miele PWM 507 Hygiene
Brand: Miele
Rating: 5 (1 reviews)

To Next Page

Operating and installation Instructions

Washing machine

To avoid the risk of accidents or damage to the appliance, it is essential

to read these instructions before it is installed and used for the first time.

en-AU, NZ M.-Nr. 11 434 810

Default Chapter2
- Table of Contents2
Caring for the Environment6
Warning and Safety Instructions7
- Control Panel15
Operating the Washing Machine15
- Symbols on the Control Panel16
- Symbols in the Display17
- Main Menu18
- Sensor Controls and Touch Display with Sensor Controls18
- Examples on How to Operate the Appliance19
Using for the First Time20
1 Preparing the Laundry24
2 Loading the Washing Machine25
3 Selecting a Programme26
4 Selecting Programme Settings27
5 Adding Detergent28
- Adding Fabric Softener or Liquid Starch Separately29
- Adding Starch Separately29
6 Starting the Programme - the End of the Programme30
Delay Start31
Programme Chart32
- Special Programmes33
- Programme Packages34
Extra Options38
- Pre-Wash38
- Pre-Rinse38
- Soak38
- Rinse Plus38
Special Features in the Programme Sequence39
- Spinning39
- Anti-Crease39
Changing the Programme Sequence40
- Changing a Programme40
- Cancelling a Programme40
- Switching on the Washing Machine after an Interruption to the Power Supply40
- Adding or Removing Laundry41
Cleaning and Care42
- Cleaning the External Casing and Fascia Panel42
- Cleaning the Detergent Dispenser Drawer42
- Cleaning the Drum, Suds Container and Drainage System44
- Cleaning the Filters in the Water Inlet44
Problem Solving Guide45
- The Programme Does Not Start45
- Programme Cancellations and Fault Messages46
- A Fault Message Appears in the Display47
- An Unsatisfactory Wash Result48
- General Problems with the Washing Machine49
- The Door will Not Open50
- Opening the Door in the Event of a Blocked Drain Outlet And/Or Power Cut51
After Sales Service54
- Contact in Case of Fault54
- Optional Accessories54
Installation55
- Front View55
- Rear View56
- Installation Locations57
- Installation Notes57
- Transporting the Washing Machine to Its Installation Site58
- Installation Surface59
- Removing the Transit Bars59
- Refitting the Transit Bars61
- Aligning the Washing Machine61
  - Securing the Washing Machine to the Plinth62
- External Control Equipment62
  - Payment System62
- Water Connection63
  - Cold Water Connection63
  - Hot Water Connection64
- Drainage65
  - Drain Valve65
  - Drain Pump65
- Electrical Connection66
Technical Data67
Supervisor Level68
- Code-Based Access68
- Changing the Code68
- Opening the Supervisor Level68
- Exiting the Supervisor Level68
- Language69
- Brightness69
- Clock Display69
- Finish Tone Volume69
- Keypad Tone69
- Welcome Tone Volume69
- Fault Alarm69
- Memory69
- Anti-Crease70
- Suds Cooling70
- Display" Switch-Off Status70
- Machine" Switch-Off Status71
- Delay Start71
- Programme Name71
- Pre-Wash Water72
- Main Wash Water72
- First Rinse Water72
- Final Rinse Water72
- Low Water Pressure73
- Empty Sensor73
- Early Warning Counter73
- Water Level Cottons73
- Water Level Minimum Iron73
- Pre-Wash Temp. Cottons73
- Wash Time Pre-Wash74
- Wash Time Cottons74
- Wash Time Minimum Iron74
- Pre-Rinse Cottons74
- Pre-Rinse Minimum Iron74
- Pre-Wash Cottons/Min. Iron74
- Cottons Rinses74
- Minimum Iron Rinses75
- Disinfection Rinse75
- Programme Packages75
- Temperature Reduction75
- Disinfection Prog. Code75
- Auto Load Control76
- Hygiene76
- Automatic Dispensing76
- Peak Load Signal76
- Peak Load Prevention76
- Alternating Current77
- Heater77
- Payment System77
  - Settings for Payment Systems77
  - Feedback Signal to Pay System78
  - Clear Paid Signal78
  - Payment System Lock78
  - FOC Programmes78

Miele PWM 507 Hygiene User Manual

Table of Contents

Questions and Answers:

Miele PWM 507 Hygiene Specifications

Related product manuals

Brand	Miele
Model	PWM 507 Hygiene
Category	Washer
Language	English