Miele PWM 507 Hygiene User Manual

5. Adding detergent
29
Adding fabric softener or liquid
starch separately
 Select the Separate rinseprogramme.
 Change the spin speed if necessary.
 Add the fabric softener or the liquid
starch to the compartment. Do not
exceed the maximum level mark.
 Touch the Start/Stopsensor.
This will be automatically dispensed in
the final rinse. At the end of the wash
programme a small amount of water
remains in the  compartment.
Adding starch separately
 Prepare the starch solution in
accordance with the manufacturer’s
instructions on the packaging.
 Select the Starchprogramme.
 Add the prepared starch to the
compartment.
 Touch the Start/Stopsensor.
Useful tip: If starching separately or
automatically, thoroughly clean the
detergent dispenser compartment,
especially the siphon, regularly.
Dye removers and dyes
 Damage due to colour run/dye
removers.
Colour run and dye removers can
cause corrosion in the washing
machine.
Do not use colour run or dye
removers in this washing machine.
Only use dyes suitable for use in a
washing machine. The manufacturer's
instructions on the packaging must be
observed.
External dispensing
The washing machine is pre-equipped
for connection to an external detergent
dispensing system. A separate
conversion kit for external dispensing
systems is required. This must be fitted
by a Miele authorised service
technician.

Miele PWM 507 Hygiene Specifications

General

Load Capacity	7 kg
Spin Speed	1400 RPM
Energy Efficiency Class	A+++
Dimensions (HxWxD)	850 x 595 x 700 mm
Type	Front-loading
Water Consumption	49 l
Programs	Hygiene

Summary

Caring for the Environment

Disposal of Packaging Material

Information on environmentally friendly disposal and recycling of packaging materials.

Disposing of Old Appliances

Guidance on disposing of the old washing machine at local recycling centers.

Warning and Safety Instructions

General Safety and Correct Application

Details on intended use, restrictions, and general safety guidelines for users.

Technical, Electrical, and Handling Safety

Covers electrical safety, earthing, unauthorized repairs, and handling agents.

Accessories and Warranty Information

Information on using genuine Miele accessories and warranty implications.

Operating the Washing Machine

Control Panel, Symbols, and Display

Identifies control panel components, symbols, and display meanings.

Using Sensor Controls and Navigation

Explains interaction with touch controls, menus, and numerical value selection.

Using for the First Time

Initial Setup and Configuration

Guide to initial setup, including language, brightness, and time settings.

Machine Commissioning and Transit Bar Removal

How to complete commissioning, remove transit bars, and prepare for operation.

Programme Operation

Preparing, Loading, and Starting Programmes

Steps for preparing laundry, loading, selecting cycles, and starting the machine.

Programme Management and Customisation

Adjusting spin speed, adding extras, and using delay start functions.

Programme Chart

Standard, Special, and Package Programmes

Overview of standard, special programmes, and disinfection cycles with parameters.

Programme Options and Features

Extra Options

Explanation of supplementary wash options like pre-wash, pre-rinse, soak, and rinse plus.

Programme Sequence Features

Details on spinning options and the anti-crease feature.

Changing Programme Sequence

Modifying, Cancelling, and Adding Laundry

How to change, cancel programmes, and add/remove laundry during operation.

Cleaning and Care

Exterior, Dispenser, Drum, and Filter Cleaning

Steps for cleaning the machine's exterior, dispenser, drum, filters, and drainage system.

Problem Solving Guide

Programme Start, Fault Messages, and Wash Results

Troubleshooting for start issues, fault messages, and unsatisfactory wash results.

Machine Issues, Door Operation, and Emergencies

Solutions for machine problems, door access, and emergency procedures.

After Sales Service

Contacting Miele and Accessories

Information on contacting Miele for service and available optional accessories.

Installation and Connection

Placement, Transport, and Levelling

Notes on placement, diagrams, transport safety, levelling, and securing the machine.

Water, Electrical, and Drainage Connections

Instructions for connecting water supplies, electrical power, and drainage.

Technical Data

Specifications and Ratings

Key technical specifications including dimensions, capacity, and electrical ratings.

Supervisor Level Settings

Access, Display, Tone, and Basic Settings

How to access, change codes, and customize language, brightness, and tones.

Programme, Water, and Feature Configuration

Configuring water levels, wash times, pre-rinse, special features, and programme packages.

System Settings and Payment Options

Settings for disinfection, load control, automatic dispensing, payment systems, and operational modes.