Installation
*INSTALLATION*
57
Installation locations
Side view
Washer-dryer stack
This washing machine can be installed
with a Miele tumble dryer on top of it. A
stacking kit (APCL001, optional
accessory) is required for this.
Installation on a raised plinth
The washing machine can be installed
on a steel plinth (open or closed,
available as an optional Miele
accessory) or on a concrete plinth.
Injury can occur if the washing
machine has not been adequately
secured.
When installed on a plinth, there is a
risk that the washing machine will
move and fall from the plinth during
spinning.
Secure the washing machine using
the clamps supplied.
Installation notes
This washing machine is not suitable
for building under.
Risk of damage due to moisture
ingress.
Moisture can damage electrical
components.
Do not install the machine near or
directly above an open gully or floor
drain.
To Next Page
Loading...
Need help?
General
