Miele PWM 507 Hygiene User Manual

Installation
*INSTALLATION*
58
Transporting the washing
machine to its installation site
 Danger of injury from incorrect
transport.
If the washing maching tips over,
there is a danger of injury to people
and damage to property.
When transporting the machine,
make sure that it is stable.
Transporting the washing machine
with a hand trolley
 If transporting the washing machine
with a hand trolley, make sure only its
left or right side is resting on the
trolley.
 Risk of damage from incorrect
transport.
The front or back of the washing
machine may be damaged if the
machine is transported on a hand
trolley.
Always transport the washing
machine on its side on a hand trolley.
Transporting the washing machine to
its installation site
The protruding lid can be used for
holding the machine during transport.
 Danger of injury due to
unsecured lid.
Make sure the fixings at the back of
the lid are secure. They may become
brittle due to external circumstances.
There is a danger of the lid being
pulled off when carrying the
appliance.
Before carrying the appliance, check
that the lid is secure where it
protrudes at the back.
 Carry the washing machine by the
front feet and by the lid where it
protrudes at the back of the
appliance.

Miele PWM 507 Hygiene Specifications

General

Load Capacity	7 kg
Spin Speed	1400 RPM
Energy Efficiency Class	A+++
Dimensions (HxWxD)	850 x 595 x 700 mm
Type	Front-loading
Water Consumption	49 l
Programs	Hygiene

Summary

Caring for the Environment

Disposal of Packaging Material

Information on environmentally friendly disposal and recycling of packaging materials.

Disposing of Old Appliances

Guidance on disposing of the old washing machine at local recycling centers.

Warning and Safety Instructions

General Safety and Correct Application

Details on intended use, restrictions, and general safety guidelines for users.

Technical, Electrical, and Handling Safety

Covers electrical safety, earthing, unauthorized repairs, and handling agents.

Accessories and Warranty Information

Information on using genuine Miele accessories and warranty implications.

Operating the Washing Machine

Control Panel, Symbols, and Display

Identifies control panel components, symbols, and display meanings.

Using Sensor Controls and Navigation

Explains interaction with touch controls, menus, and numerical value selection.

Using for the First Time

Initial Setup and Configuration

Guide to initial setup, including language, brightness, and time settings.

Machine Commissioning and Transit Bar Removal

How to complete commissioning, remove transit bars, and prepare for operation.

Programme Operation

Preparing, Loading, and Starting Programmes

Steps for preparing laundry, loading, selecting cycles, and starting the machine.

Programme Management and Customisation

Adjusting spin speed, adding extras, and using delay start functions.

Programme Chart

Standard, Special, and Package Programmes

Overview of standard, special programmes, and disinfection cycles with parameters.

Programme Options and Features

Extra Options

Explanation of supplementary wash options like pre-wash, pre-rinse, soak, and rinse plus.

Programme Sequence Features

Details on spinning options and the anti-crease feature.

Changing Programme Sequence

Modifying, Cancelling, and Adding Laundry

How to change, cancel programmes, and add/remove laundry during operation.

Cleaning and Care

Exterior, Dispenser, Drum, and Filter Cleaning

Steps for cleaning the machine's exterior, dispenser, drum, filters, and drainage system.

Problem Solving Guide

Programme Start, Fault Messages, and Wash Results

Troubleshooting for start issues, fault messages, and unsatisfactory wash results.

Machine Issues, Door Operation, and Emergencies

Solutions for machine problems, door access, and emergency procedures.

After Sales Service

Contacting Miele and Accessories

Information on contacting Miele for service and available optional accessories.

Installation and Connection

Placement, Transport, and Levelling

Notes on placement, diagrams, transport safety, levelling, and securing the machine.

Water, Electrical, and Drainage Connections

Instructions for connecting water supplies, electrical power, and drainage.

Technical Data

Specifications and Ratings

Key technical specifications including dimensions, capacity, and electrical ratings.

Supervisor Level Settings

Access, Display, Tone, and Basic Settings

How to access, change codes, and customize language, brightness, and tones.

Programme, Water, and Feature Configuration

Configuring water levels, wash times, pre-rinse, special features, and programme packages.

System Settings and Payment Options

Settings for disinfection, load control, automatic dispensing, payment systems, and operational modes.