Miele PWM 507 Hygiene User Manual

Using for the first time
23
Removing the transit bars
The display will remind you to remove
the transit bars.
 Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in “Installation and connection”.
 Confirm that the transit bars have
been removed with the OKsensor.
The following appears in the display:
Continue setting up as described in the
Operating instructions
 Confirm the message with the OK
sensor.
Completing the commissioning
process
To complete commissioning, the
Cottons 60°Cprogramme must be run
without laundry and without detergent.
If the power is interrupted prior to the
start of the first wash programme (e.g.
if the machine is switched off with the
 button), the initial commissioning
process can be completed again.
Once a wash programme has been
running for over 20minutes, the initial
commissioning process does not need
to be performed again.
 Turn on the water taps.
 Turn the programme selector
toCottons 60°C.

1600
 
Coloured items
60°C
h
0:59
 Touch the Start/Stop sensor.
When the programme has finished, your
machine is ready for use for the first
time.
If you have activated disinfection
programmes, you must complete the
Thermal disinfectionprogramme as
the first programme; make sure you
use a suitable detergent but do not
load the machine.

Miele PWM 507 Hygiene Specifications

General

Brand	Miele
Model	PWM 507 Hygiene
Category	Washer
Language	English