Supervisor level
77
Alternating current
The time remaining displayed depends
on the electrical connection. If a
single-phase connection is used, the
setting must be switched to No.
Factory setting: Yes
Heater
The heater can be switched off and
the Thermostop step is skipped. In
addition, heater fault monitoring is
deactivated.
Factory setting: On
Payment system
External hardware is connected via the
Miele XCI box.
If you wish to change the settings later,
please contact Miele.
Settings for payment systems
You would like to connect a payment
system.
– No payment system
The next settings are skipped and
initial commissioning can be
completed.
– Programme operation
The machine is operated using a coin
box. The user purchases a wash
programme.
– Time operation
The machine is operated using a coin
box. The user purchases a time-
controlled programme.
– Timed operation with pulse counter
For payment systems where the
usage time is increased each time a
coin is inserted.
To Next Page
Loading...
Need help?
General
