Miele PWM 507 Hygiene User Manual

Changing the programme sequence
41
Adding or removing laundry
You can add or remove items during the
first few minutes after the programme
has started.
 Touch the Start/Stopsensor.
The following will appear in the display:
Add laundry
Cancel
programme
 Touch the Add laundry sensor.
The programme will stop and the door
will unlock.
 Risk of chemical burns from
detergent.
When adding or removing laundry
during the main wash, your skin may
come into contact with detergent,
particularly if the detergent is
dispensed externally.
Take care when placing your hands
inside the drum.
If suds have come into contact with
the skin, rinse off immediately with
lukewarm water.
 Pull open the door.
 Add laundry or remove individual
items.
 Close the door.
 Touch the Start/Stopsensor.
The wash programme will continue.
Once a programme has started
successfully, the washing machine
cannot recognise any adjustment to
the load.
For this reason, if laundry is added or
removed after the start of a
programme, the machine will always
complete the programme cycle
assuming a full load.
The door cannot be opened, if:
– The suds temperature is above 55°C.
The safety lock will remain activated if
the temperature in the drum is above
55°C. The lock will not deactivate until
the temperature has dropped to below
55°C.

Miele PWM 507 Hygiene Specifications

General

Brand	Miele
Model	PWM 507 Hygiene
Category	Washer
Language	English