Using for the first time
22
The programmes are activated (framed)
or deactivated (no frame).
Confirm with the OK sensor.
The display switches back to the
programme packages.
Programme
packages
Disinfection
Continue
Select other programme packages or
confirm your selection with the
Nextsensor.
The display will change to the next
setting.
Setting up a payment system
If you wish to set up a payment system,
read the chapter “Supervisor level -
Payment system”.
If you do not wish to set up a payment
system, you can skip this step.
Payment
system
No payment
system
Programme
control
Touch the No payment system sensor.
The display will change to the next
setting.
Selecting pre-wash water
Touch the Coldsensor if the washing
machine is only connected to the
cold water supply, or touch Hotif the
washing machine is connected to
both cold and hot water.
The display will change to the next
setting.
Selecting main wash water
Touch the Coldsensor if the washing
machine is only connected to the
cold water supply, or touch Hotif the
washing machine is connected to
both cold and hot water.
Further information will appear in the
display.