Changing the program sequence
51
Adding or removing laundry
You can add or remove items during the first few minutes after the
program has started.
11:02
Denim
Status
Time left
h0:37
Main wash
Add laundry
Touch the Add laundrysensor button.
If the messageAdd laundry is not visible in the display then it is no
longer possible to add items of laundry.
The wash program will stop and the door will unlock.
Risk of chemical burns from detergent.
When adding or removing laundry, your skin may come into con-
tact with detergent, particularly if the detergent is dispensed exter-
nally.
Take care when placing your hands inside the drum.
If suds have come into contact with the skin, rinse off immediately
with plenty of lukewarm water.
Pull open the door.
Add laundry or remove individual items.
Close the door.
Touch the Start/Stopsensor button.
The wash program will continue.
The door lock will remain activated if the temperature in the drum is
above 130°F (55°C). The door lock will not deactivate until the tem-
perature has dropped to below 130°F (55°C).
To Next Page
Loading...
Need help?
General
