Miele TCR 860 WP User Manual

5. Starting a programme
35
Starting the programme
The programme can be started when
the Start/Stop sensor control is flashing
on and off.
 Touch the Start/Stop sensor control.
The Start/Stop sensor control lights up
constantly.
11:02 Status

Cottons
Time left
Machine iron
 PerfectDry

h1:42
Add laundry
Drying and the programme duration re-
maining will light up in the display.
The laundry will be cooled down shortly
before the end of the programme.
Tip: In the pull-down menu you can
view the selected drying level or dura-
tion and the energy consumption.
With programmes with a selectable dry-
ing level, PerfectDry calculates the resid-
ual moisture present in the laundry to
ensure precise drying results. If a small
load or dry laundry is placed in the
dryer, it is dried/aired for a preset dura-
tion.
The PerfectDry display will only light up
with programmes with selectable drying
levels:
- Hollow point  after a programme
has started
The drying level reached will still be
shown later on.
- Solid point  when the drying level is
reached
The time left for the drying level pro-
grammes can vary or “jump”. It de-
pends on the load quantity, type of
laundry, residual moisture in the laundry
or water hardness. PerfectDry continu-
ally adapts, constantly increasing the
accuracy of the time left.
To prevent laundry wearing out
avoid overdrying it.
Energy savings
After 10minutes, the indicators dim and
the Start/Stop sensor starts flashing.
 Touch the Start/Stop sensor to switch
the indicators on again (this does not
have any effect on a running pro-
gramme).
The drum lighting switches off once the
programme has started.
Adding laundry
You can add laundry items after the
programme has started.
 Follow the description in “Changing
the programme sequence – Adding or
removing laundry”.

Miele TCR 860 WP Specifications

General

Brand	Miele
Model	TCR 860 WP
Category	Dryer
Language	English