Problem solving guide
73
Cleaning the fluff filter in the
condensed water container
In some circumstances, there can be
problems running the Steam care pro-
gramme. The fluff filter at the end of
the hose which is connected to the
rubber seal in the condensed water
container could be blocked.
Remove the condensed water con-
tainer.
Reach under the side lug on the
spout with your finger.
Pull out the spout.
Do not pull on the hose with force.
Otherwise it will come loose.
Guide the end of the hose through
the opening.
Hold it securely with one hand
Use your other hand to pull the fluff
filter off the hose.
Rinse the fluff filter with a jet of water
until all the fluff has been removed.
Refit the cleaned fluff filter onto the
end of the hose.
Now feed the hose with its fluff filter
attached into the condensed water
container.
Refit the spout in the condensed wa-
ter container ensuring that it is posi-
tioned correctly. Please refer to the
image.
To Next Page
Loading...
Need help?
General
