Settings
102
Programme sequence
Anti-crease
The Anti-crease function reduces
creasing after the end of the pro-
gramme.
The drum will continue to rotate for up
to 2hours after the drying cycle has fin-
ished. This helps to reduce creasing.
Options
- Off
- 1 h
- 2 h (factory default)
Cooling down temp.
The laundry will be cooled down auto-
matically before the end of the pro-
gramme. The automatic cooling-down
phase which takes place before the
end of a programme can be set at a
cooler level for all the drying level pro-
grammes. This means that the cooling
phase is extended.
Selection
The value is set in increments of 1°C.
- 55°C (factory default setting)
- ...
- 40°C
Drying levels
You can alter the drying levels for the
Cottons, Minimum iron and Automatic
programmes.
It can be set to one of 7 different set-
tings.
Factory default: a medium setting
To Next Page
Loading...
Need help?
General
