Problem solving guide
78
Cleaning the fluff filter in the
condensed water container
When certain programmes are being
used, water is taken from the con-
densed water container and sprayed
into the drum. The spray jet can some-
times stop working. The fluff filter in
the condensed water container is
clogged.
Remove the condensed water con-
tainer.
Reach under the side lug on the
spout with your finger.
Pull out the spout.
Be careful not to tug on the hose to
avoid detaching it.
Guide the end of the hose through
the opening.
Hold it securely with one hand.
Use your other hand to pull the fluff
filter off the hose.
Rinse the fluff filter with a water jet
until all the fluff has been removed.
Attach the clean fluff filter to the end
of the hose.
Now feed the hose back into the con-
densed water container.
Refit the spout in the condensed wa-
ter container ensuring that it is posi-
tioned correctly. Please refer to the
image.
Replacing the condensed wa-
ter spray jet
When certain programmes are being
used, water is taken from the con-
densed water container and sprayed
into the drum. The spray jet can some-
times stop working. Limescale depos-
its have built up on the spray jet.
To Next Page
Loading...
Need help?
General
