Changing the programme sequence
50
Changing a programme once it
has started
It is no longer possible to change the
selected programme. This is to prevent
the operation of the machine being
tampered with.
If you adjust the programme selector,
Cannot be changed will light up in the
display. This indicator goes out when
you select the original programme.
Cancelling the current programme
Turn the programme selector to the
position.
The programme is cancelled.
You can now select a new programme.
Adding or removing laundry
You have forgotten something but the
programme is already running.
Touch the Start/Add laundrysensor
control.
The following appears in the display:
Door can be opened. The Start/Add
laundry sensor control flashes slowly.
Open the door.
Add or remove laundry items.
You can still change the programme se-
lection.
Close the door.
Touch the Start/Add laundrysensor
control.
The programme continues.
Exceptions when adding laundry
In some cases, for example, during
the cooling phase or the Proofing pro-
gramme, it is not possible to add laun-
dry items.
In exceptional cases, the door can be
opened while the programme is run-
ning.
To Next Page
Loading...
Need help?
General
