Changing the programme sequence
43
You cannot change to another pro‐
gr
amme once a programme has started
(this prevents unintentional alterations).
If you move the programme selector,
Programme cannot be changed will
light up in the display until you move
the pr
ogramme selector back to the
original programme.
You will need to cancel the current pro‐
gramme before you can select a new
one.
Once a programme has star‐
t
ed ...
... cancelling the programme and
then selecting a n
ew programme
Press the Start/Stop button.
Confirm Cancel programme
with the
OK sensor.
– Cooling down will light up in the dis‐
play, dep
ending on the drying dura‐
tion and the drying temperature
reached.
– Wait until Finish lights up in the dis‐
play or pr
ess the
Start/Stop b
utton
again until
Finish lights up.
Press the button to switch the dry‐
er off.
P
ress the button to switch the dry‐
er on.
Selec
t and start a new programme
straight away.
... saving the programme as a favour‐
it
e
P
ress the
Start/Stop b
utton.
Select and confirm Save programme.
You can save this programme under Fa‐
vourites.
See "Favourites, 2. Entering a
name".
Adding or removing laundry af‐
t
er a programme has started
P
ress the Start/Stop button.
Select Cancel programme.
Co
nfirm by touching the
OK sensor
.
– Cooling down will light up in the dis‐
play, dep
ending on the drying dura‐
tion and the drying temperature
reached.
– Wait until Finish lights up in the dis‐
play or pr
ess the
Start/Stop button
again until Finish lights up.
Danger of burning.
Do not touch the back of the drum
when adding o
r removing items. The
drum and the items can be very hot.
Add
or remove items.
Clo
se the door.
To continue with the programme:
(change the drying level first of all, if
necessa
ry)
Press the Start/Stop. button.
Programme duration
Altering the programme sequence can
cause the
programme duration shown
in the display to be adjusted.
To Next Page
Loading...
Need help?
General
