Cleaning and care
42
Cleaning the plinth filter
Clean the plinth filter whenever the
indicator light comes on or when the
program duration is longer than usual.
To turn the indicator light off:
Open and close the door while the
dryer is switched on.
Removing the plinth filter
Press the round, indented area on the
heat exchanger access panel to open
it.
The panel will spring open.
Pull the plinth filter out by the handle.
This causes the right-hand guide pin in
the dryer to come out. This pin ensures
that the heat exchanger access panel
can only be closed if the plinth filter is
inserted the right way round.
To Next Page
Loading...
Need help?
General
