Programmable functions
76
Airway indicator
Lint should be removed after drying.
The indicator light will also come
on when a certain amount of lint has
collected in the filters.
You can decide at what level of lint
this reminder should be given.
You will have an idea of how often this
should be done after a few drying
programs.
Options
= Off
The indicator light does not
come on. However, if there is a
very severe blockage in the
ducting, the program will be
cancelled and the error
message will appear on
the display regardless of this
option.
= Heavy
The indicator light will come
on when there is a heavy build-
up of lint.
= Normal (factory setting)
= Light
The indicator light will come
on when there is only a small
build-up of lint.
Display brightness dimmed
The brightness of the dimmed sensor
buttons on the display can be set to
one of seven different levels.
The brightness will change as soon as a
different setting is chosen.
Options
= Darkest level
= Factory setting
...
= Brightest level
To Next Page
Loading...
Need help?
General
