Before using for the first time
20
Downtime after installation
Damage to the tumble dryer by
switching it on too soon.
This can damage the heat pump.
After setting up the tumble dryer,
wait for at least one hour before
switching it on.
Removing the protective foil
and stickers
Remove:
- the protective foil from the door
- any stickers from the front and the lid
Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.
Follow the procedure for using
for the first time outlined in
these instructions
Refer to “1.Notes on correct laundry
care” and “2.Loading the tumble
dryer”.
You can then load the tumble dryer
and select a programme as described
in “3.Selecting a programme and
starting it”.
To Next Page
Loading...
Need help?
General
