4. Removing the laundry at the end of the programme
29
End of programme/Anti-crease
End of programme: lights up in the
time display and the Start/Add laundry
sensor goes out.
The end of the programme is followed
by the Anti-crease phase, which will run
for up to 2hours. There is no Anti-
crease with Woollens handcare.
See “Programmable functions -
Anti-crease”.
Removing the laundry
Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried and
cooled down.
Pull the door open at the side with
the orange marker.
Remove the laundry.
Always remove all items from the
drum.
Items left in the dryer could be
damaged by overdrying when the
dryer is used the next time.
Turn the programme selector to the
position.
Remove the fluff from the 2 fluff filters
in the door opening (see “Cleaning
and care - Fluff filters”).
Shut the door with a gentle swing.
Empty the condensed water
container.
To Next Page
Loading...
Need help?
General
