EasyManuals Logo
Home>Miele>Dryer>TWR 780 WP

Miele TWR 780 WP User Manual

Miele TWR 780 WP
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
Problem solving guide
75
Reactivating the plinth filter
You can reactivate one or more soiled
plinth filters in a washing machine. You
will then be able to use the plinth filter
again.
Prior to reactivation, check that the
plinth filter is in good order. Check the
plinth filter following the instructions
provided in “Problem solving guide –
Replacing the plinth filter”. Replace the
plinth filter if it has worn out.
Wash the plinth filter(s) separately,
not with any laundry items. Do not
add any detergent.
Select a short wash programme with
a maximum temperature of 40°C and
a maximum spin speed of 600rpm.
You can re-insert the plinth filter once
the wash and spin cycles are complete.
Checking the heat exchanger
Risk of injury from sharp cooling
fins.
You could cut yourself.
Do not touch the cooling fins with
your hands.
Look to see if fluff has accumulated.
Remove any fluff you can see.
Damage due to incorrect clean-
ing of the heat exchanger.
The tumble dryer will not dry if the
cooling fins are damaged or bent.
Clean using a vacuum cleaner with a
suction brush attached. Only pass
the vacuum cleaner brush over the
heat exchanger cooling fins lightly,
without applying any pressure.
Use a vacuum cleaner to remove fluff
and residues.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele TWR 780 WP and is the answer not in the manual?

Miele TWR 780 WP Specifications

General IconGeneral
Door colorChrome
Door hingeLeft
Cord length2 m
Control typeButtons, Touch
Loading typeFront-load
Drying systemHeat pump
Product colorWhite
Reversible doorsYes
Appliance placementFreestanding
Cycle time220 min
Noise level62 dB
Drying classA
Drum capacity9 kg
Refrigerating mediumR134a
Number of drying programs20
Self-cleaning-
Delay start (max)24 h
Near Field Communication (NFC)No
Current10 A
Heat sourceElectric
Connected load1100 W
AC input voltage220 - 240 V
AC input frequency50 Hz
Energy consumption1.47 kWh
Energy efficiency scaleA+++ to D
Annual energy consumption174 kWh
Weight and Dimensions IconWeight and Dimensions
Depth643 mm
Width596 mm
Height850 mm
Weight62000 g
Depth with door open1077 mm

Related product manuals