EasyManuals Logo
Home>Miele>Dryer>TWR 780 WP

Miele TWR 780 WP User Manual

Miele TWR 780 WP
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
Installation
*INSTALLATION*
83
External condensed water out-
let
Note
When drying is in progress, con-
densed water is pumped into the con-
densed water container through the
drain hose which is located at the
back of the dryer.
The condensed water can also be ex-
ternally drained away via the drain hose
at the back of the dryer. This means
that the condensed water container no
longer has to be emptied.
Drain hose length: 1.49m
Max. delivery head: 1.00m
Max. drain hose length: 4.00m
Drainage accessories
- Supplied: Adapter (b), Hose clip (c),
Hose holder (e);
- Available to purchase: “Non-return
valve” kit for connection to an ex-
ternal water connection. Non-return
valve (d), Hose extension (a) and
Hose clips (c) are supplied.
Installation conditions requiring a
non-return valve
Danger of condensed water
back-flow.
Water could flow back into the
tumble dryer or be drawn into it.
Back-flow water could damage the
tumble dryer and also the room in
which it is located.
The non-return valve should be used
if the end of the hose is immersed in
water, or if other water connections
are installed.
Maximum delivery head with non-return
valve fitted: 1.00m
Installation conditions requiring the fit-
ting of a non-return valve:
- Drainage into a sink or floor gully
where the end of the hose is im-
mersed in water.
- Connection to a sink drain outlet.
- Connection to a drainage system
already in use by another appliance,
e.g. a dishwasher or washing ma-
chine.
If the non-return valve is incorrectly
fitted the appliance will not drain.
The non-return valve has to be fitted
with the arrow on it pointing in the
direction of flow.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele TWR 780 WP and is the answer not in the manual?

Miele TWR 780 WP Specifications

General IconGeneral
Door colorChrome
Door hingeLeft
Cord length2 m
Control typeButtons, Touch
Loading typeFront-load
Drying systemHeat pump
Product colorWhite
Reversible doorsYes
Appliance placementFreestanding
Cycle time220 min
Noise level62 dB
Drying classA
Drum capacity9 kg
Refrigerating mediumR134a
Number of drying programs20
Self-cleaning-
Delay start (max)24 h
Near Field Communication (NFC)No
Current10 A
Heat sourceElectric
Connected load1100 W
AC input voltage220 - 240 V
AC input frequency50 Hz
Energy consumption1.47 kWh
Energy efficiency scaleA+++ to D
Annual energy consumption174 kWh
Weight and Dimensions IconWeight and Dimensions
Depth643 mm
Width596 mm
Height850 mm
Weight62000 g
Depth with door open1077 mm

Related product manuals