Miele TWR 780 WP User Manual

Installation
*INSTALLATION*
91
Refitting
7. Refit the door
 Press the rubber seal back into the
grove on the door.
 Position the door in front of the dryer.
 Fit the base of the door hinge with its
2 pins into the openings on the dryer.
The base of the door hinge must be
flush with the front panel of the dryer.
The door cannot fall off in this position.
 Screw the door securely to the dryer
at the base of door hinge .
 Now that you have changed the
door hinging the door will open from
the opposite side.
 Push the orange marker round to the
other side so that you will see at
which side to pull the door open.
Important
 Please keep the lock catch and
door hinge covers which were no
longer needed in a safe place. These
will be required if, for example, you
move house and need to change the
door hinging back to its original posi-
tion.

Miele TWR 780 WP Specifications

General

Door color	Chrome
Door hinge	Left
Cord length	2 m
Control type	Buttons, Touch
Loading type	Front-load
Drying system	Heat pump
Product color	White
Reversible doors	Yes
Appliance placement	Freestanding
Cycle time	220 min
Noise level	62 dB
Drying class	A
Drum capacity	9 kg
Refrigerating medium	R134a
Number of drying programs	20
Self-cleaning	-
Delay start (max)	24 h
Near Field Communication (NFC)	No
Current	10 A
Heat source	Electric
Connected load	1100 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy consumption	1.47 kWh
Energy efficiency scale	A+++ to D
Annual energy consumption	174 kWh

Weight and Dimensions

Depth	643 mm
Width	596 mm
Height	850 mm
Weight	62000 g
Depth with door open	1077 mm