Miele W1 White Edition User Manual

Problem solving guide
53
The programme is cancelled and a fault indicator light lights up
in the control panel
Problem Cause and remedy
The fault indicator light
 lights up,  and  ap-
pear alternately in the
time display and the
buzzer sounds.
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
 Clean the drain filter and the drain pump.
 The maximum delivery head is 1m.
The fault indicator light
 lights up,  and  ap-
pear alternately in the
time display and the
buzzer sounds.
The water inlet is blocked or restricted.
 Check whether the stopcock is opened properly.
 Check whether the inlet hose is kinked.
 Check whether the water pressure is too low.
The filter in the water inlet is blocked.
 Clean the filter.
The fault indicator light
 lights up,  and 
appear alternately in the
time display and the
buzzer sounds.
The water protection system has reacted.
 Close the stopcock.
 Call the Service Department.
and appear altern-
ately on the time display
and the buzzer sounds.
There is a fault.
 Disconnect the washing machine from the electri-
city supply. Switch off at the wall and withdraw the
plug from the socket, or disconnect the fuse.
 Wait at least 2minutes before reconnecting the
washing machine to the electricity supply.
 Switch the washing machine on again.
 Restart the programme.
If the fault message appears again, contact the
Miele Customer Service Department.

Miele W1 White Edition Specifications

General

Brand	Miele
Model	W1 White Edition
Category	Washer
Language	English