Programmable functions
87
RemoteUpdate
The RemoteUpdate function is used to
update the software in your washing
machine. If an update is available for
your washing machine, it will automatic-
ally download it. Updates will not be in-
stalled automatically. They must be initi-
ated manually.
If you do not install an update, you can
continue to use your washing machine
in the usual way. However, Miele re-
commends installing updates.
Running a RemoteUpdate
Information about the content and
scope of an update will be provided in
the Miele app.
A message will appear on the time
display if an update is available.
You can install the update immediately
or postpone it until later. When the
washing machine is switched on again,
you will be reminded about the update.
Deactivate RemoteUpdate if you do not
want to install any updates.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch off the washing ma-
chine during an update. Otherwise,
the update will be aborted and will
not be installed.
- Some software updates can only be
carried out by the Miele Customer
Service Department.
Activating/Deactivating
The RemoteUpdate function is activ-
ated as standard. Available updates will
be downloaded automatically but will
only be installed if you initiate installa-
tion manually. Deactivate RemoteUp-
date if you do not want any updates to
be downloaded automatically.
Options
= RemoteUpdate is deactivated
= RemoteUpdate is activated
(factory default)
Starting the update
After the washing machine is switched
on, appears on the time display.
Touch theStart/Add laundry sensor
control.
starts to flash on the time display.
The update starts.
Bars on the time display show the pro-
gress of the update:
= 0%
= 100%
To Next Page
Loading...
Need help?
General
