Programmable functions
79
The programmable functions are used
to alter the machine's electronics to
suit changing requirements. Program-
mable functions can be altered at any
time.
The programming is carried out in eight
steps (, , ... ) using the sensor
controls.
Accessing the programming level
Pre-requisites:
- The washing machine is switched on
(the programme selector is pointing
to a wash programme).
- The washing machine door is open.
Touch the Start/Add laundry sensor
and leave your finger on it whilst car-
rying out steps -.
Close the washing machine door.
Wait until the Start/Add laundry sensor
lights up constantly ...
... and then take your finger off the
Start/Add laundry sensor.
After approx. four seconds, will light
up in the time display.
Choosing and selecting a pro-
grammable function
The number of the programmable
function will appear in the time display
as and a number: e.g..
Touch the or sensor control to
scroll to the next or previous pro-
grammable function:
Programmable functions
Keypad tone
PIN code
Control field switch-off behaviour
Memory
Additional long pre-wash – Cottons
Gentle action
Reduced temperature
Maximum rinse level
Suds cooling
Anti-crease
Low water pressure
Display brightness dimmed
TwinDos
Dosage quantity UltraPhase 1
Dosage quantity UltraPhase 2
TwinDos maintenance
Degree of soiling
Remote control
SmartGrid
RemoteUpdate
Confirm the selected programmable
function by touching theStart/Add
laundry sensor control.
To Next Page
Loading...
Need help?
General
