Mikado VBar NEO Quick Start Guide

4. Installation of PC Software
Important: The PC Software will only connect to a VBar if
it is registered on www.vstabi.info using the VBar Control
Manager, and if the current key le is installed.
Copy the key le to C:/Program Files (x86)/VBarControl/. On
the Mac, right-click the program and select Show Package
Contents, follow the VStabi alias; copy the key le here.
Windows
Download the VBar Control Manager and the PC Software
from www.vstabi.info and install. Program icons will appear
on your desktop.
Connect your VBar to the computer using the USB wire. Wait
until the message “new hardware found” appears and the
hardware assistant has started up. When prompted to enter
the location on which the drivers are stored, please point to
the directory ...\Program Files (x86)\VBarControl... or click on
“install automatically.”
On some Windows installations, it may be necessary to
connect the VBar to your PC and install the driver manually
using the device manager. Additional help is available on
www.vstabi.info (see PC Software section).
Apple Macintosh
For Mac OS X there is a separate VBar Control Manager and
PC Software version available as a download from www.vstabi.
info, including the driver. The necessary driver installation starts
when you double-click on the driver package. Then follow the

Mikado VBar NEO Specifications

General

Brand	Mikado
Model	VBar NEO
Category	Remote Control
Language	English