23 - 1
23 Battery
23.1 Battery Safety Information
• Keep batteries out of children’s reach.
• Use only specified battery. Use of a different battery may present a risk of fire or explosion.
• Keep the batteries in their original package until you are ready to use them.
• Do not expose batteries to liquid.
• Do not crush, drop or puncture the battery. Mechanical abuse can lead to internal damage and
internal short circuits. If a battery has been dropped or banged against a hard surface, whether
damage is externally visible or not, remove the battery from use and dispose of it properly.
• If the battery shows signs of damage or signs of leakage, replace it immediately.
• The battery should be charged in this equipment or the specified charger station.
• Extremely high ambient temperature may cause battery overheat protection, resulting in
equipment shutdown.
• Do not open batteries, heat batteries above 60 °C, incinerate batteries, or short battery terminals.
They may ignite, explode, leak or heat up, causing personal injury.
• Always connect the equipment to external power supply whenever it is possible.
• Always install a fully charged battery in the equipment.
23.2 Battery Indications
• After long term use, the power capacity indicated by the battery symbol may be different from the
actual capacity. Always observe the alarm information displayed on the screen.
• The alarm “Low Battery” means that the battery is beginning to weaken, you should immediately
connect the equipment to the external power supply. After this alarm is triggered, at least 20
minutes of monitoring and 6 shocks at 360J can be performed.
23.3 Conditioning the Battery
• Do not use the equipment during battery conditioning.
• Do not interrupt battery conditioning.
To Next Page
Loading...
Need help?
General
