Preface 1-5
1.3 Safety Precautions
Please read the following precautions carefully to ensure the safety of the patient and the operator
when using the probes.
Do not operate this system in an atmosphere containing flammable
or explosive gases such as anesthetic gases, oxygen, and
hydrogen because an explosion may occur.
1.3.1 Electric Safety
Connect the adapter power plug of this system and power
plugs of the peripherals to wall receptacles that meet the
ratings indicated on the rating nameplate. Using a
multifunctional receptacle may affect the system grounding
performance, and cause the leakage current to exceed safety
requirements. Use the power cable provided with this system.
Before cleaning or disassembling the system, disconnect the
power cord from the socket. Otherwise, it may cause electric
shock.
Make sure all connections are correct before connecting the
power supply cable during system maintenance. Otherwise
damage may result by hot plug.
Do not use this system simultaneously with equipment such
as an electrosurgical unit, high-frequency therapy
equipment, or a defibrillator, etc.; otherwise electric shock
may result.
This system is not water-proof. If any water is sprayed on or
into the system, electric shock may result.
DO NOT connect or disconnect the system’s power cord or
its accessories (e.g., a printer or a recorder) without turning
OFF the power first. This may damage the system and its
accessories or cause electric shock.
Avoid electromagnetic radiation when perform performance
test on the ultrasound system.
In an electrostatic sensitive environment, don’t touch the
device directly. Please wear electrostatic protecting gloves if
necessary,
You should use the ECG lead wires provided with the ECG
module. Otherwise it may result in electric shock.
To Next Page
Loading...
Need help?
General
