Mindray Passport 8 Service Manual

Passport 8/12 Service Manual 2-3
2.2.2 Connectors for Peripheral Devices
On the back of the monitor you can find all connectors for peripheral devices.
Passport 12 Rear View
1. AC power input: used to connect an AC power source (100 to 240 VAC, 50/60 Hz).
2. Equipotential terminal: used to connect the equipotential terminal of other equipment.
3. Parameter Module slot: used to connect the parameter module.
4. General USB Connector: used to connect any USB-compatible peripheral device.
5. Multifunctional connector:
 Used to connect external devices and output defibrillator synchronization signals, nurse call signals, analog
output signals, measurement numerics, and alarm limits of parameter modules.
 Communicates with external devices via Datascope Improved ASCII Protocol (DIAP) protocol.
6. Network Connector: an RJ45 connector, used to connect an Ethernet network or a PC.
7. VGA Connector: used to connect a secondary display.

Mindray Passport 8 Specifications

General

Brand	Mindray
Model	Passport 8
Category	Medical Equipment
Language	English