MINN KOTA CoPilot - Installing the CoPilot Receiver - Part 4

10 | minnkotamotors.com
©2019 Johnson Outdoors Marine Electronics, Inc.
INSTALLATION
q. Once the wires are in place and the Center Housing
is seated, stow the motor to replace the Left
Sideplate
r. Replace the Right Sideplate.
Sideplate Screw
s. Using a #2 Phillips Screwdriver, replace the four
1/4-20 x 5/8’’ Screws from the Right Sideplate and
Left Sideplate of the PowerDrive mount.
Right Sideplate
Left Sideplate
Base Extrusion
8r
8
9
8q