Mitel MiVoice 4420 IP Basic Installation Instructions

6/1531-ASP11301 Uen T2 2015-04-23 16
I
NSTALLATION TEST
11 INSTALLATION TEST
This section describes installation test at the end of the installation procedure.
11.1 BASIC INSTALLATION TEST
This section specifies basic check for correct installation of hardware components,
mechanics, and cables.
1) Make sure all internal, external, power and network cables are correctly
connected.
2) Make sure all cable connector screws are firmly tightened.
11.2 INSTALLATION TEST FOR MIVOICE MX-ONE
To check functionality for the MX-ONE telephones (if available) proceed as follows:
1. Make calls from an IP telephone to another IP telephone, to an analog telephone,
to a Dect phone, to a digital telephone and to a external number.
2. Make a call from an external number to a IP telephone.
3. Make calls from a Digital telephone to another Digital telephone, to an analog
telephone, to a Dect phone, to a IP telephone and to a external number.
4. Make a call from an external number to a Digital telephone.
5. Make calls from an analog telephone to another analog telephone, to a IP tele-
phone, to a Dect phone, to a digital telephone and to a external number.
6. Make a call from an external number to a analog telephone.
7. Make calls from a Dect telephone to another Dect telephone, to an analog tele-
phone, to a IP phone, to a digital telephone and to a external number.
8. Make a call from an external number to a Dect telephone.
9. Make calls to and from an Operators terminal to above different terminals (if
available) and to and from an external number.

Mitel MiVoice 4420 IP Basic Specifications

General

Brand	Mitel
Model	MiVoice 4420 IP Basic
Category	Server
Language	English