6/1531-ASP11301 Uen T2 2015-04-23 4
I
NTRODUCTION
1.3.3 SAFETY
All personnel involved in installation must read and understand the safety instructions
prior to installation, see the description document for SAFETY.
1.3.4 SITE PLANNING
Read through each device installation documentation, and from there, conclude where
the equipment shall be installed.
For MX-ONE, an analogue trunk line generates a touch or leakage current which if
there are several analogue trunk lines installed, it calls for the installation to be in a
“Restricted Access Location”. The MX-ONE 3U and 7U chassis are marked with a
warning text “High voltage current...” to reflect this.
1.3.5 GROUNDING AND EARTHING
In this document the expressions grounding and earthing have the same meaning.
To Next Page
Loading...
Need help?
General
