INSTALLING MIVOICE MX-ONE HARDWARE, OVERVIEW
5 6/1531-ASP11301 Uen T2 2015-04-23
2 OVERVIEW MIVOICE MX-ONE PRODUCTS
2.1 BOARDS IN MIVOICE MX-ONE
The following circuit boards can be used in the exchange. For technical data about the
boards, see document 20/1531-ASP11301, INSTALLATION CHASSIS IN A CABI-
NETT
Table 1 Boards
Note: When ASU is stated, it means all versions of ASU, ASU Lite and ASU-II.
Board Product number Information
ALU2 ROF 137 5373/11
Alarm unit for external alarms
ASU ROF 137 6307/21 Mitel Server Unit, 4GB
ASU ROF 137 6307/22
Mitel Server Unit. 8GB
ASU Lite ROF 137 6307/31
Mitel Server Unit, Lite. 4GB
ASU-II ROF 137 6307/4
Mitel Server Unit. 16GB
DC/DC ROF 137 6303/1
Power unit
ELU26 ROF 137 5321/12
ISDN-S digital extensions
ELU31 ROF 137 5412/4
DECT extensions, Base stations
ELU33 ROF 137 5062/1
Digital extensions
ELU34 ROF 137 5064/x
Analog extensions with message waiting
FTU2 ROF 137 5415/11
Failure Transfer Unit
MFU ROF 137 5348/x
Multi frequency unit
MGU ROF 137 6304/x
Media Gateway Unit, 8 E1/T1
MGU2 ROF 137 6304/4
Media Gateway Unit, 4 E1/T1
TLU76 ROF 137 5338/x
Digital trunk, ISDN, E1, DPNSS, CAS, SS7
TLU77 ROF 137 5387/x
ISDN, T1, DPNSS, CAS depending on version
TLU79 ROF 137 5349/11
ISDN-T 2B+D trunk line
TLU80 ROF 137 5406/11
4-wire analog trunk using E&M signaling. NOTE !! This
board can only be used in MX-ONE Classic (7U). Not in
MX-ONE Lite (3U) or the 1U-chassis.
TLU83 ROF 137 6305/1
Analog trunk line (loop start, ground start. CLI with FSK
and DTMF)
TLU83 ROF 137 6305/2
Analog trunk line (loop start, ground start, call metering.
CLI with FSK and DTMF)
TLU83 ROF 137 6305/3
Analog trunk line (loop start, ground start, CLI with
DTMF)
TMU ROF 137 5335/x
Tone and Multi part Unit. DTMF