17
HWE1212A
DISASSEMBLY PROCEDURE-Service panel
8. DISASSEMBLY PROCEDURE
8-1. Service panel
Procedures Explanatory figure
1. Removing the service panel
1
(Figure 1-1)
(1) Remove the four service panel
1
mounting screws.
2. Removing the service panels
2
and
3
(Figure 1-2)
(1) Remove the five service panel
3
mounting screws.
(2) Remove the two service panel
2
mounting screws.
Service panel 1
Service panel 2
Service panel 3
Figure 1-1
Figure 1-2