19
8-11. SLEEP ( ) OPERATION
1. How to set SLEEP operation
(1) Press STOP/OPERATE (OFF/ON) button.
(2) Select COOL, DRY, HEAT or FAN mode.
(3) Press SLEEP (
) button.
(4) PRESS TEMPERATURE buttons [
(Increase) and (Decrease) ] to set the temperature of SLEEP
operation.
Fan speed: AUTO
Horizontal vane: Position set on the remote controller
Operation indicator lamp: Dimly lit
• Once the above procedure is completed, the settings will be saved.
• After the settings are saved, a single push of SLEEP (
) button during operation activates SLEEP operation with the
same settings every time.
• Temperature for SLEEP operation cannot be set during DRY or FAN mode.
Set temperature for SLEEP operation
For about 30 minutes after
SLEEP (
) button
is pressed, the set temperature remains as set for the operation running
when SLEEP button is pressed. It will change to the set temperature for SLEEP operation in about 30 minutes.
Pressing
SLEEP (
) button
again returns the operation to the previous settings.
is
pressed.
is
pressed.
For about 30
minutes
Set
temperature for
the operation
before SLEEP
operation
Set temperature for
SLEEP operation
Set temperature for
the operation before
SLEEP operation
NOTE:
• ON/OFF timer is available during SLEEP operation.
• When a preset ON time for the weekly timer becomes during SLEEP operation, the weekly timer operation has priority. SLEEP
operation will be cancelled, and the operation set on the weekly timer will start.
2. How to cancel operation
• Press SLEEP (
) button again.
• The operation returns to the previous settings.
• SLEEP operation is also cancelled when the FAN button is pressed or the operation mode is changed.
NOTE: SLEEP operation and SMART SET operation cannot be set at same time.
To Next Page
Loading...
Need help?
General
