Remove the radiator cap only after the engine has
cooled to room temperature. Place a cloth over the
cap, and loosen the cap about a half-turn or stand the
lever to the upright position to release internal pres-
sure. Opening the radiator cap while the engine is hot
causes steam and hot coolant to spray out and may
result in skin burns.
1. Open the radiator cap and check the coolant level.
2. If the coolant level is low, add coolant to the speci-
fied level.
Always use the coolant with the same LLC concentra-
tion.
Note: Determine the quantities of LLC based on the
coolant capacity and the LLC concentration
chart.
For the coolant, refer to "COOLANT" (6-1). For
the coolant capacity, refer to "MAIN SPECIFI-
CATIONS" (12-1).
3. If a reserve tank is equipped, fill the reserve tank
with coolant up to the [FULL] line level.
Fig. 3-4 Radiator cap
Fig. 3-5 Radiator coolant level
Fig. 3-6 Reserve tank coolant level
To Next Page
Loading...
Need help?
General
