– 16 –
How to Run / Stop a Group
This runs or stops a group.
Method A
< RUN > With the air conditioners stopped (RUN / ERROR display off), press a GROUP RUN / STOP but-
ton
All the indoor units in the group run and the RUN / ERROR display lamp lights up green.
< STOP > With the air conditioners running (RUN / ERROR display lamp lit up green), press a GROUP
RUN / STOP button.
All the indoor units in the group stop and the RUN / ERROR display lamp goes out.
Method B
1 2 3
1. Press the ALL / GROUP / ONE button and select GROUP.
The options are displayed in the order.
2. Press the SELECT (
or ) button to set the group number to run or stop.
If you select Group 88, all the registered groups run or stop.
3. Press the RUN or STOP button.
Note
The CENTER / REMOTE setting for indoor units can only be made for indoor units set to “CENTER” or “CENT-
ER” and “REMOTE”.
This operation is disabled on indoor units set to “REMOTE”.
•
RUN / ERROR display lamp
GROUP RUN / STOP button
To Next Page
Loading...
Need help?
General