Mitsubishi Heavy Industries SCM50ZS-W User Manual

-
12
-
'19 • SCM-SM-281
'09•SRK-DB-087D
(b) Sleep timer operation
(11)

Timer operation
(a) Comfort start-up (ON timer operation)
(c) OFF timer operation
(14)
Air flow range setting
(a) Setting
(i) If the air-conditioner is running, press the ON/OFF button to stop.
(ii)
Press the AIR FLOW U/D (UP/DOWN) button and the
AIR FLOW L/R (LEFT/RIGHT) button together for 5 seconds
or more.
(iii) Setting the air flow range.
(iv) Press the ON/OFF button.
Air flow range Air flow rangeAir flow range
(Left end installation) (Center installation) (Right end installation)
(Center installation)
L/R
L/R
(Right end installation) (Left end installation)
The unit starts the operation 5 to 60 minutes earlier so that the room can approach optimum temperature at ON timer.
The OFF timer can be set at a specific time (in 10-minute units) within a 24-hour period.
(d) Weekly timer operation
Up to 4 programs with timer operation (ON timer / OFF timer) are available for each day of the week.
Take the air-conditioner location into account and adjust the left/right air flow range to maximize air-conditioning.
display
'09•SRK-DB-087D
(10)3D auto operation
(a)
(i)
(ii)
(b)
Cooling
Air flow selection
Operation mode
AUTO HI MED LO
Heating
Room temp. – Setting temp. >5°C
Room temp. – Setting temp. 5°C
Setting temp. – Room temp. >5°C Setting temp. – Room temp. 5°C
HIGH POWER AUTO
HI MED LO
HIGH POWER AUTO
<
=
<
=
Flap
Louver
Cooling
Up/down swing
Heating
Wide (Fixed)Center (Fixed)
Flap
Louver
Cooling Heating
Left/right swing
Horizontal blowing (Fixed) Slant forwardl blowing (Fixed)
Flap
Louver
Cooling Heating
Wide (Fixed)
Flap
Louver
Cooling Heating
Horizontal blowing (Fixed) Slant forwardl blowing (Fixed)
Operation mode
Room temp. – Setting temp. 2°C
Setting temp. – Room temp. 2°C
Heating
Cooling
Air flow direction contorol
2°C < Setting temp. – Room temp. 5°C
2°C <
Room temp. – Setting temp. 5°C Room temp. – Setting temp. > 5°C
Setting temp. – Room temp. > 5°C
The control in 4) continues. Control returns to the control in 2). Control returns to the control in 1).
The control in 4) continues. Control returns to the control in 2). Control returns to the control in 1).
<
=
<
=
<
=
<
=
Wide (Fixed)
Flap
Louver
Horizontal blowing (Fixed)
1)
2)
3)
4)
5)
4
Fan speed
During cooling and heating operation (Including auto cooling and heating operation)
Up/down swing
Center (Fixed)
During DRY operation (including auto DRY operation)
room
3
Setting temp.
Room Room
room
'09•SRK-DB-087D
(10)3D auto operation
(a)
(i)
(ii)
(b)
Cooling
Air flow selection
Operation mode
AUTO HI MED LO
Heating
Room temp. – Setting temp. >5°C
Room temp. – Setting temp. 5°C
Setting temp. – Room temp. >5°C Setting temp. – Room temp. 5°C
HIGH POWER AUTO
HI MED LO
HIGH POWER AUTO
<
=
<
=
Flap
Louver
Cooling
Up/down swing
Heating
Wide (Fixed)Center (Fixed)
Flap
Louver
Cooling Heating
Left/right swing
Horizontal blowing (Fixed) Slant forwardl blowing (Fixed)
Flap
Louver
Cooling Heating
Wide (Fixed)
Flap
Louver
Cooling Heating
Horizontal blowing (Fixed) Slant forwardl blowing (Fixed)
Operation mode
Room temp. – Setting temp. 2°C
Setting temp. – Room temp. 2°C
Heating
Cooling
Air flow direction contorol
2°C < Setting temp. – Room temp. 5°C
2°C <
Room temp. – Setting temp. 5°C Room temp. – Setting temp. > 5°C
Setting temp. – Room temp. > 5°C
The control in 4) continues. Control returns to the control in 2). Control returns to the control in 1).
The control in 4) continues. Control returns to the control in 2). Control returns to the control in 1).
<
=
<
=
<
=
<
=
Wide (Fixed)
Flap
Louver
Horizontal blowing (Fixed)
1)
2)
3)
4)
5)
4
Fan speed
During cooling and heating operation (Including auto cooling and heating operation)
Up/down swing
Center (Fixed)
During DRY operation (including auto DRY operation)
room
3
Setting temp.
Room Room
room
'09•SRK-DB-087D
(10)3D auto operation
(a)
(i)
(ii)
(b)
Cooling
Air flow selection
Operation mode
AUTO HI MED LO
Heating
Room temp. – Setting temp. >5°C
Room temp. – Setting temp. 5°C
Setting temp. – Room temp. >5°C Setting temp. – Room temp. 5°C
HIGH POWER AUTO
HI MED LO
HIGH POWER AUTO
<
=
<
=
Flap
Louver
Cooling
Up/down swing
Heating
Wide (Fixed)Center (Fixed)
Flap
Louver
Cooling Heating
Left/right swing
Horizontal blowing (Fixed) Slant forwardl blowing (Fixed)
Flap
Louver
Cooling Heating
Wide (Fixed)
Flap
Louver
Cooling Heating
Horizontal blowing (Fixed) Slant forwardl blowing (Fixed)
Operation mode
Room temp. – Setting temp. 2°C
Setting temp. – Room temp. 2°C
Heating
Cooling
Air flow direction contorol
2°C < Setting temp. – Room temp. 5°C
2°C <
Room temp. – Setting temp. 5°C Room temp. – Setting temp. > 5°C
Setting temp. – Room temp. > 5°C
The control in 4) continues. Control returns to the control in 2). Control returns to the control in 1).
The control in 4) continues. Control returns to the control in 2). Control returns to the control in 1).
<
=
<
=
<
=
<
=
Wide (Fixed)
Flap
Louver
Horizontal blowing (Fixed)
1)
2)
3)
4)
5)
4
Fan speed
During cooling and heating operation (Including auto cooling and heating operation)
Up/down swing
Center (Fixed)
During DRY operation (including auto DRY operation)
room
3
Setting temp.
Room Room
room
Note (1) Timer operation from wireless remote control becomes invalid when you connect the interface kit (such as SC-BIKN2-E).

Mitsubishi Heavy Industries SCM50ZS-W Specifications

General

Brand	Mitsubishi Heavy Industries
Model	SCM50ZS-W
Category	Air Conditioner
Language	English