Mitsubishi 2013 Outlander User Manual

3-188
Features and controls
3
Dimmer (high/low beam change)
N00549900142
To change the headlights from high beam to low beam and vice
versa, pull the turn signal lever to (1). Switch the headlights to
low beam as a courtesy whenever there are oncoming vehicles,
or when there is traffic moving ahead of you. An illuminated
blue light in the instrument cluster indicates when the head-
lights are on high beam.
Headlight flasher
N00550000185
You can flash the high beams by pulling the lever gently
toward you (2). The lights will go back to normal when you let
go. While the high beam is on, you will see a blue light on the
instrument panel.
N
OTE
● You can flash the high beams by pulling the lever toward
you, even if the light switch is off.
● If you turn the lights off with the head lights set to high-
beam illumination, the headlights are automatically
returned to their low-beam setting when the light switch is
next turned to the “ ” position.
BK0150700US.book 188 ページ ２０１２年３月２２日 木曜日 午後６時４６分
Information Provided by:

Mitsubishi 2013 Outlander Specifications

General

Brand	Mitsubishi
Model	2013 Outlander
Category	Automobile
Language	English