OTE
● Do not connect the USB memory device to the USB input
terminal directly.
The USB memory device may be damaged.
● When closing the floor console box, be careful not to trap
the USB connector cable.
5. To remove the USB connector cable, turn the ignition
switch to the “OFF” position or put the operation mode in
OFF first and perform the installation steps in reverse.
How to connect an iPod
N00566900088
1. Park your vehicle in a safe place and turn the ignition
switch to the “OFF” position or put the operation mode in
OFF.
2. Open the USB input terminal cover (A) in the floor con-
sole box.
BK0150700US.book 233 ページ 2012年3月22日 木曜日 午後6時46分